Skip to content
  • Rated 5.0 on Google
  • 40 years in the trade
  • Fully insured
  • Ex-Forces owned
  • Free site visits, no call-out charge
  • Domestic and commercial

HomeServices › Structural Work

Structural Work

Taking walls out, putting steel in, and making sure the house stays up.

40 years in the trade. Domestic and commercial, across the North East.

Why us

Why Tyne and Wear homeowners choose our structural work

Calculations first, hammer second

The engineer's spec decides the steel, the bearing and the padstones. Nothing gets cut until that is in.

Propped properly

Temporary support is the part that goes wrong badly. It is not the place to save a day.

Signed off, not covered up

Building control sees the steel and the bearings before anything is boarded.

structural work we installed

What it is

Structural Work, built to last

Load-bearing wall removal, steel beam installation, structural openings, underpinning and remedial work. This is the part of a job where the difference between a builder and a bloke with a lump hammer actually matters, and where the paperwork matters as much as the work.

  • Structural engineer's calculations arranged
  • Temporary support and propping
  • Steel beams supplied and installed
  • Padstones and bearings formed properly
  • Opening formed and made good
  • Building control inspection and sign-off
Book your structural work quote

40 years in the trade. Domestic and commercial, across the North East.

Choices

The structural work options we offer

Wall removal and steels

Opening a kitchen into a dining room, or two rooms into one.

Structural openings

New doors, bifolds or windows in a load-bearing wall.

Remedial and underpinning

Movement, cracking and failed lintels put right.

Ready for your free structural work quote?

A free site visit and a written quote, with no obligation and no chasing afterwards.

What actually holds the opening up

A steel beam does not simply sit in the wall. It bears on padstones — dense blocks that spread the load into the masonry below — and those bearings are sized by the engineer for the load and the wall.

Most failures we are called to are bearing failures, not beam failures: the steel was fine, what it was sitting on was not.

Older houses round here

Solid-wall Victorian and Edwardian property was built with far more internal walls than people want now. That is why wall removal is one of the most common jobs we take on, and why the ground conditions and the wall construction have to be checked rather than assumed.

Looking after your structural work

Expect fine cracking along the new plaster line as the house settles into the change. That is normal and gets filled at decoration. Anything wider than a hairline, or that keeps opening, is worth a look.

The GGH Build Standard

Our structural work process at a glance

How your structural work job actually runs, start to finish.

  1. Free site visit

    You show us round and tell us what you want. We measure up and talk through what it involves.

  2. Written quote

    An estimated cost with the scope in plain English. Groundwork the job needs is priced in here, not later.

  3. The work

    Propped, opened, steel set on proper bearings to the engineer's spec, then made good — with building control seeing it before it is covered up.

  4. Handover

    We walk it with you and write the snagging list together. Not signed off until that list is empty.

Get a Free Quote 40 years in the trade. Domestic and commercial, across the North East.

In their own words

Trusted by homeowners across the North East

Real customers, real names, real jobs.

Structural Work

Common structural work questions

Response during working hours, Monday to Saturday Call 07366 264 992

For anything load-bearing, yes, and building control will want the calculations. We arrange it as part of the job rather than leaving you to find one.

Usually, from the direction of the joists, what sits above it and where it is in the plan. Where it is not obvious we open up a small section rather than guess.

The work itself is often a few days. The lead time is usually the engineer's calculations and getting the steel cut, which is why we start that early.

Where we work

Areas we cover

Across Tyne and Wear, Northumberland and Teesside. Find your town below — no call-out charge anywhere we go.

Get a Free Quote

Free, no-obligation quote. No pressure, no chasing. We respond during working hours, Monday to Saturday.

40 years in the trade. Domestic and commercial, across the North East.